HM88 HYDRAULIC CYLINDERS

Characteristic Values

Usage:100% stainless, primarily for industrial hydraulics, cylinder diameter from ø32 to ø100mm both included.
Cylindertube:Skived and roller burnished AISI 304, internal tolerance H11, Ra max 0,4 µm
Pistonrod:Quality AISI 329 corresponding to SS2324, Hard chrome 25 μm ± 5 μm, hardness min. 850 HV., Ra max. 0.2 μm, external tolerance ISO f7. Special material qualities can be delivered on request.
Seals:(Standard) Piston: Nitrile with acetal guide rings. Piston rod: Lip seal of polyurethane. Wiper: PTFE with o-ring of nitrile rubber.
Normal pressure:Ø32mm-250 bar, Ø40mm-250 bar, Ø50mm-235 bar, Ø63mm-185 bar, Ø80mm-155 bar, Ø100mm-120 bar.
Test pressure:Technical specifications: see cylinder tube.
Piston speed:Max. piston speed 0,2 m/sek., in case the full stroke is not used (piston never reaches top or bottom)
Tubebreakprotection:Can be built-in by custom order.
Cussioning:Not available with damping
Positioning:Can be delivered with different types of electronic positioning, e.g. from REGAL, MTS-Temposonics or BALLUF.(see special brochure).
Working temperat.:Operating temperature ÷30° C to +100° C
Pressure medium:Mineral oil-based hydraulic oil.
Painting:Untreated. Can for extra charge be delivered painted or glass blown.

Fjero entwickelt und fertigt kundenspezifische und standardisierte Hydraulikzylinder. Unsere Hydraulikzylinder erfüllen täglich viele verschiedene Funktionen - oft in anspruchsvollen Umgebungen.

Unsere Kunden, die in vielen verschiedenen Branchen tätig sind, stellen hohe Anforderungen an Funktionalität, Qualität und Langlebigkeit.

Konfigurator

cookie ikon

Vi bruger cookies, ved at du klikker dig videre til næste side, accepterer du hjemmesidens brug af cookies.
Du kan også acceptere cookies ved at klikke her